Installation Sheet

Customer Service: 800-626-1126 | rev-a-shelf.com
4
20180612-1
Step 5.
Step 6.
3/3
Step 7.
Step 10.
Step 8.
Step 9.
20180612-1
Step 5.
Step 6.
3/3
Step 7.
Step 10.
Step 8.
Step 9.
With the swivel frame in the
open position, locate the
(2) holes on the backside of
the frame. Using the (2) M4x6
mm machine screws, attach the
Handle Bracket.
(Fig. 5)
NOTE: Leave unit in the open
position for the next step.
Remove the screw from the
black bumper on the support
arm and set pieces to the side.
Place the support arm on top
of handle bracket and secure
using the M5x8mm screw.
(Fig. 6A)
Place the opposite end of the
support arm under the slotted
portion of the connector,
re-attach the black bumper
pieces with the removed screw
from the beginning of this step
and secure. (Fig. 6B)
M5x8 mm screw
Bumper Pieces
Bumper Pieces
STEP 5
2/3
10-3/4”
7-9/16”
14-11/16”
7-9/16”
1/2”
Between
15-24”
STEP 6
(2) M4x6 mm
Machine screws
Handle
Bracket
#2
FIG.
5
FIG.
6A
FIG.
6B