Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
6
Locate the (4) pre-tapped holes on
the Swivel Frame. With the knobs
facing outward, attach the Top
Bracket and the Bottom Bracket
to the Swivel Frame using (4)
M4x6 Flat Head Screws. NOTE:
Top Bracket is attached to the
uppermost holes on the Swivel
Frame.
With the thinner portion of the
Gas Spring pointing down, snap
the Gas Spring into position using
the knobs on the Top and Bottom
Brackets (See Fig. 7).
NOTE: Ensure the thinner
portion of the Gas Spring is
pointing down.
STEP 7
Left Side
Figure 7
Right Side