Installation Sheet

INSTALLATION INSTRUCTIONS: THE CLOUD: BLIND CORNER ORGANIZER 3
STEP 4
Using the provided support
arm screws, secure the support
arm to the cabinet side wall
(See Fig 5). At this time, insert
the plastic cap into the support
arm as shown.
Using the provided guide track
wood screws, secure the guide
track to the cabinet oor (See
Fig 6).
STEP 5
STEP 6
FIGURE 8
Slide the pivot guide onto the
guide tracks (See Fig 7).
Align the tray over the top of
the pivot guide and support
arm. Insert the tray into the
corresponding attachments
and press rmly into place.
Snap the plastic tray stop into
the shelf guide track.
(See Fig 8).
STEP 7
STEP 8
STOP STOP
FIGURE 5
FIGURE 6 FIGURE 7
ATTACH
SCREWS
FIGURE 4
Place the guide track template
on your cabinet oor. Follow
the directions on the template
to orient the template
correctly. Secure template to
the oor with tape and punch
pilot holes with your awl and
rubber mallet (See Fig 4).
IF YOU INTEND TO INSTALL THE SOFT-CLOSE KIT, TURN TO PAGE 10 AT THIS
TIME. OTHERWISE, PROCEED TO STEP 8 AND CONTINUE YOUR INSTALLATION.
#2
#2
ATTACH
SCREWS
INSERT CAP
PRESS FIRMLY
INTO PLACE
SLIDE PIVOT GUIDES HERE
SHELF GUIDE
TRACK
STOPPER