Installation Sheet

4
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
DOOR MOUNTING
FIGURE 1
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 2
Attach the mounting bracket
to the tray with (2) M4x6 per
side (See Fig 1).
Insert (2) 1/4-20x1/2” screws
into the mounting bracket per
side, but do not completely
tighten.
Insert door mounting bracket
between screws and mounting
bracket. Tighten the screws.
Repeat for the opposite side
(See Fig 2).
NOTE: Door mounting
bracket should face toward
the outside of the bracket.
Place the tray on top of the
slides and push back until the
basket locks under the tab
at the rear and at the button
on the side. You should hear
the button click when fully
engaged (See Fig 3).
Use the door mounting
measurements in Fig 4 to
mount the brackets to the
door using (6) #6x1/2” at
head screws.
You may also apply double
sided tape to the door
mounting brackets. Align to
the surrounding drawer/door
(See Fig 5). Slowly pull unit
open and install (4) screws per
bracket in the door.
STEP 1
STEP 2
STEP 3
M4x6 Screws (4)
1/4-20x1/2” Screws (4)