Installation Instructions

ManualsBrandsRev-A-Shelf ManualsKitchen12 in. Pull-Out Baskets with Maple Solid Bottom

1

2

3

4

5

6

7

INSTALLATION INSTRUCTIONS: 5330/5386 SERIES PULLOUT BASKET WITH SOFT-CLOSE 3

SIDE MOUNTING

INSTRUCTIONS

FIGURE 1 FIGURE 2

FIGURE 3

STEP 1

FIGURE 5

Attach the side mount brackets

to the front of the slides using

(4) M4x10 athead screws

(See Fig 1).

Place side mounting template

to side of cabinet and

pre-drill hole locations (See Fig

2) and install the cabinet side

mounting brackets.

Place the slide assembly on

top of the cabinet mounting

bracket, insert (4) M4x10

athead screws, adjust to the

desired width of basket and

tighten the screws. Repeat for

the opposite side (See Fig 3).

Install release levers and rear

slide brackets to the bottom of

the unit (See Fig 4).

NOTE: If you are mounting to

a cabinet door, skip to Page 4

at this time.

Place the basket on top of the

slides and push back until the

basket locks under the tab

at the rear and at the button

on the side. You should hear

the button click when fully

engaged (See Fig 5).

STEP 2

STEP 3

STEP 4

STEP 5

3

32

3

mm

FIGURE 4

#6x3/4” Flat Head Screws (4)

Euro Screws (4)