Installation Instructions

ManualsBrandsRev-A-Shelf ManualsCabinet Organization & AccessoriesCharging Drawer with Blum Drawer Slides for Frameless Cabinets

INSTALLATION INSTRUCTIONS: CHARGING DRAWER

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

CHARGING DRAWER

I-4WCDB18-0718

TOOLS REQUIRED:

20 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and wipe

parts dry.

PARTS LIST

No. Description Qty.

A Charging Drawer w/ Outlet 1

B Cable Carrier Arm 1

C Anti-Skid Pad 1

D Figure 8 Mounting Brackets 2

E #6 x 1/2” Pan Head Screws 4

F #8 x 5/8” Wood Screws 14 (7 for FL)

G #8 x 1/2” Truss Head Screws 2

H Blum SC Slides 2

I Rear BLUM Brackets (FF only) 2

J BLUM Release Triggers 2

K Wire Clamps 5

L 1/4-14 x1/2” Screws 5

M Large Bracket w/ (2) Screws 1

SCALE 0.500

WATCH VIDEO TUTORIALS OF

PRODUCT INSTALLATIONS

WWW.REV-A-SHELF.COM/VIDEOS

Summary of content (5 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 CHARGING DRAWER TOOLS REQUIRED: #2 ESTIMATED ASSEMBLY TIME: 20 MIN CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. WATCH VIDEO TUTORIALS OF PRODUCT INSTALLATIONS PARTS LIST No. Description Qty.
PAGE 2
FIG. A FIG. E INSTRUCTION FOR ATTACHING SLIDES AND INSTALLING THE DRAWER Install the right and left Blum triggers on the bottom of the drawer using (4) #6 x 1/2” pan head screws (See Figure A). 1-1/4” (32mm) STEP 1 NOTE: For frameless application, skip to Step 2. 1-1/32” (26mm) Place (2) screws in the top row in each of the two corners and place (2) screws in the fourth row as indicated by the dark circles in Figure E. FIG.
PAGE 3
FIG. H STEP 4 12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com 800-626-1126 Plungers Attach the cable carrier arm to the large bracket that is secured to the left Blum slide by dis-engaging the locking mechanism, inserting the plungers, and re-engaging the locking mechanism (See Figure H). Slide the drawer onto the slides, lock the slides onto the triggers, and cycle a few times.
PAGE 4
1 INSTRUCCIÓN PARA FIJAR LOS CARRILES E INSTALAR EL CAJÓN. INSTRUCTIONS POUR LA FIXATION DES COULISSES ET L’INSTALLATION DU TIROIR. A Instale los gatillos Blum izquierdo y derecho en la parte inferior del cajón usando (4) tornillos de cabeza troncocónica n.º 6 de 1/2” (ver Figura A). 13/16” (21mm) E Installez les déclencheurs Blum gauche et droits au fond du tiroir à l’aide de (4) vis à têtes cylindrique 12,7 mm, diam. 3,5 mm (voir schéma A).
PAGE 5
H 4 Nervaduras Goujons Fije el brazo portacables a la abrazadera grande que se adjunta al carril Blum izquierdo desconectando el mecanismo de cierre, insertando las nervaduras y reconectando el mecanismo de cierre. (ver Figura H). Deslice el cajón por los carriles, bloquee los carriles sobre los gatillos y muévalo unas pocas veces.