Installation Guide
Customer Service: 800-626-1126 | rev-a-shelf.com
2
INSTALLING THE SLIDES
STEP 1
ATTACHING TRIGGERS
STEP 2
DOOR MOUNT
BRACKET ORIENTATION
STEP 3
FIGURE 1
FIGURE 2
FIGURE 3
PRE-DRILLED
HOLES
LOOSEN TO
SWITCH BRACKETS
Use the Blum template to install
slides to cabinet oor (See Fig 1)
Install the Blum locking devices
to the underside front corners
of the wood frame with supplied
screws (See Fig 2).
Loosen the bolts and switch
door mount brackets from the
position they were shipped in to
the normal position.
NOTE: Disregard this step if
you are installing into a cabinet
with an inset door application.
MOVENTO