Installation Sheet

4WP Series
Installation Instructions
Step 1. Set Swing Out unit in cabinet with
3/4" spacer underneath for floor clearance
Note: For opposite-hand installation, remove pantry
shelves and chrome rails from bottom shelf. Turn
pantry unit over. Reinstall shelves and chrome rails.
.
Step 2. Swing Piano Hinge around to inside of
cabinet where unit is to be installed.
Step 3. Place the 1/4" spacers between unit and
center divider of cabinet. One at top and
bottom of unit
1/4" Spacer
Center Divider
Piano Hinge
Swing Out Unit
Swing Out Unit
(25" tall version shown)
Ov I-4WP-1012er
Contents
1- Pantry Unit with Piano Hinge
1- Magnetic Catch and Strike Plate
4-Wire Fence pieces for top shelf (if needed)
8 - Wood plugs for top shelf (if wire fence is not used)
2- 1/4" spacers
1-Screw pack
Items needed for installation
Phillips Head Screw Driver
3/4" wood spacer
Note: If adequate clearance is available, install top shelf
wire fencing. If clearance is not available install
wood
plugs into holes
Top View

Summary of content (2 pages)