Installation

Cutting Instructions
Recommended Cutting Lines
4WCT/4WUT/4SDI
Cut width of insert to t inside of drawer. Cut back of insert to t from inside front to rear of the drawer.
When cutting to size, remember your drawer box wall can be used as a sidewall for your organizer.
4WKB
Flip board over and remove any screws that would be in the way of the cutting path.
The 4WKB-1 Knife Block is designed to be trimmed in order to fit into most drawers.
1. Measure drawer opening.
12400 Earl Jones Way, Louisville, KY 40299
[phone] | rev-a-shelf.com
I-4WKB-0415
4WKB-1 WOOD KNIFE BLOCK
INSTALLATION
INSTRUCTIONS
2. Measure the knife block to see where you will
need to trim.
3. Flip board over and remove any screws that
would be in the way of the cutting path.
Note: Divider can be removed and trimmed to
proper height.
4. Simply drop in drawer.
Table saw
recommended.
4SDI4WCT 4WUT
4WKB-1
4CDI-24KCUP-1
4CDI-KCUP
4CDI-18KCUP-1
4WDKB-1
Recommended Cutting Lines
For ease of cutting we recommend
cutting through knife slots.