Installation Instructions

4
Customer Service: 800-626-1126 | rev-a-shelf.com
I-486VSM-1217
Turn drawer box upside down.
Place Blum triggers against the
front and side walls of drawer box
NOTE: The orange cover of trigger
faces the inside of the frame.
Triggers are marked left and right.
Attach triggers to drawer box using
(4) #6 x 1/2” pan head screws (See
Figure H).
STEP 8
Place the drawer box onto the
slide assembly and push back until
the unit locks to slides (See Figure I).
NOTE: You will hear a “click”
when it locks.
STEP 9
Pull out drawer box and cycle a
few times to check function of
slides and check to make sure the
door will not hit the drawer box
when closed.
Press divider clips into holes on
the drawer box in the desired
locations then slide the dividers
onto the clips (See Figure J).
STEP 10
STEP 11
FIG. H
FIG. I
FIG. J
Divider
Clip
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
#2#2#2