Installation Sheet

Left Side: Align edge of paper with edge of cabinet.
Right Side: Align edge of paper with edge of cabinet.
Top left hand slide
T-449FL-0219
14-11/16”
(372.9 mm)
21-5/8”
(549.5 mm)
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
BASE ORGANIZER
Slide unit into cabinet and
attach door.
1/8” spacer for 7-3/4” & 10-3/4” openings.
No spacers needed to 7-1/2” and 10-1/2” openings.
(1/4” spacers are for custom cabinet openings)
TOOLS REQUIRED:
20 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
PARTS LIST
A. (6) #8 x 5/8” Flat head screws
for 1/8” spacer
B. (6) #8 x 1” Flat head screws
for 1/4” spacer
C. (6) M5 Euro screws
D. (4) #6 x 1/2” Door mounting
screws
E. (6) 1/8” slide side spacer
F. (6) 1/4” slide side spacer
A
C
E
F
D
B
Attach slides to side and bottom
of cabinet using (6) #8 x 5/8” at
head screws (See Figure 2).
Attach unit to slides
(See Figure 3).
Slide the unit into the cabinet and
attach door using (4) #6 x 1/2” at
head screws (See Figure 4).
Note: Align adjustable mounting
brackets to the thickest portion of
the door.
Place template and mark hole
locations for the top left hand slide
(See Figure 1). Flip the template
and do the same for the bottom
right hand slide.
STEP 1
STEP 2
STEP 3
STEP 4
Bottom right hand slide
Fig. 1
Fig. 3
Fig. 2
Fig. 4
(3) #8 x 5/8” screw hole locations
(3) #8 x 5/8” screw hole locations