Instructions / Assembly

ManualsBrandsRev-A-Shelf ManualsKitchen5 in. Pull-Out Wood Wall Organizer with Blum Soft-Close Slides

1

2

3

4

5

6

7

INSTALLATION INSTRUCTIONS: 448 SERIES PULLOUT WALL CABINET ORGANIZER W/ SOFT-CLOSE 3

Place the template inside of

the wall cabinet. Position the

template so the front edge

is ush with the front of the

cabinet frame (See Fig 1).

STEP 1

With a 3/8” drill bit, drill

through the (4) marked hole

locations labeled “Pre-drill here

for bolt application”.

NOTE: Drill through the

cabinet oor (See Fig 2).

Place the unit over the top of

the holes and secure using the

(4) machine bolts (See Fig 3).

NOTE: Make sure the bolts

go through the holes from

the underside of the cabinet

up into the cabinet oor,

and secure them with a #2

Phillips head screwdriver. The

corresponding holes on the

slide set are threaded

for attachment.

STEP 2

STEP 3

INSTALLATION WITH MACHINE BOLTS

Proceed to page 4 at this time

for door mounting instructions.

STEP 4

FIGURE 1

FIGURE 2

FIGURE 3

3

8