Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
4
Adjustment Screw
STEP 7
Tighten “Adjustment Screw”
(this will push mounting
bracket out) until cabinet
door is at desired position.
To add tilt to your door;
whether it be to the left,
right, top, or bottom, use the
adjustment screw. (Fig 6B)
FIG. 6B
Lock Nut/
T-Nut
FIG. 6A
To adjust your cabinet door
side to side use a 3/8-in
wrench, you will want to use
the “Lock Nut” adjustment,
refer to FIG 6A for the “Lock
Nut” location.
NOTE
All “Lock Nuts” must be
loose in order for the door
to move completely left or
right.
STEP 6
Door Adjustment Section
STEP 8
Tighten “T-Nut” to lock ller
against adjustment screws.
(Fig 6A)
NOTE
Refer to the “Adjustable
Rub Bushing Installation”
instructions, found in the
“Adjustable Rub Bushing
Kit” (refer to I-ARBKIT-0312),
included with this unit.
STEP 9
Rub Bushing Installation
Install the provided rub
bushings in line with the top
rails. (Fig 7)
NOTE
Wood frame will need to be
removed from the cabinet
once the appropriate rub
bushings have been selected
in order for the bushings to
be installed.
FIG. 7
3
8