Instructions / Assembly

Center Line of Cabinet Opening
Screw and Pilot Hole
Location (4) Places
Fig. 1
Fig. 2
Blum release triggers
need to be at front of unit
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
L-SHAPED VANITY ORGANIZER FOR 24” VANITY SINK BASE CABINET
TOOLS REQUIRED:
30 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
PARTS LIST
- L-Shaped Vanity Organizer
- Blum Release Triggers
- (2) Slide Locking Devices
- (4) #8 x 3/4” Pan Head Screws
- (4) #6 x 1/2” Pan Head Screws
- (6) Plastic Trays
- (2) Wood Plug Covers
3
32
Attaching slide to cabinet
1) Install the right and left Blum release triggers on the bottom of the drawer
using (2) #6 x 1/2” pan head screws for each trigger (See Fig. 1).
2) Insert wood plug covers to cover holes (see Fig. 2).
3) Using the mounting template locations, pre-drill (4) holes using a 3/32” drill
bit.
4)Removetemplateandattachtheslideassemblytotheoorofthecabinet
using (4) #8 x 3/4” pan head screws provided.
5) With the slides in the fully closed position, place the frame on the slides and
push back until you feel the slides engage the locking devices (you will hear a
click sound). Fully cycle the frame a few times.
T-441-12VSBSC-0218
Front edge of paper
to front of cabinet
(or front of face frame)
Fold Template along
this edge to t cabinet
opening.