Installation Sheet

INSTALLATION INSTRUCTIONS: 438 SERIES PULLOUT ORGANIZER 3
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
SHIPPING STRAP
Remove the shipping strap
from the chassis (See Fig F).
To release the BLUM slides,
squeeze the release triggers
and hold while pulling the
organizer away from cabinet
run (See Fig G). Then,
disassemble the pullout from
the chassis (See Fig H).
TOP SLIDE
RELEASE
LEVER
BOTTOM SLIDE
RELEASE LEVER
#2
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
ORGANIZER
FIGURE E
SPACER
STEP 1
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
FIGURE H
FIGURE F
STEP 2
INSTALLING FROM
BACK OF CABINET
Disassembling
the pullout
from the chassis
SHIPPING STRAP
Refer to Figure E for the
following steps:
Step 1
Mark the center of your
cabinet then slide the
organizer to the back of
the cabinet.
Step 2
Screw through the top and
bottom of the frame to
secure the chassis.
Note
It is now OK to remove the
shipping strap.
FIGURE G