Installation Sheet

Customer Service: 800-626-1126 | rev-a-shelf.com
2
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
This model has two options for
installation: from the front of
the cabinet or from the back of
the cabinet (See Fig A).
NOTE: Installing from the
front of the cabinet will
require modication to your
organizer.
FIGURE A
DETERMINE YOUR
APPLICATION
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
OPTION 2
INSTALL FROM
BACK OF THE
CABINET
OPTION 1
INSTALL FROM
FRONT OF THE
CABINET
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
FIGURE B
CUT THIS
SECTION
RESULT
SPACER
(NOT INCLUDED)
FIGURE C
DETAIL A
DETAIL B
CUT DOWN TO MINIMUM
HEIGHT OF 26.38
SEE DETAIL A
OVERALL HEIGHT 27.31
SEE DETAIL B
To install the organizer from
the front of the (face frame)
cabinet you will need to cut
material off of the bottom
of the organizer (See Fig B).
The resulting height of the
organizer will depend on your
cabinet opening so that it can
t through the face frame.
NOTE: A spacer is needed to
t the gap between the top
of the cabinet and the top of
the frame. (See Fig C)
NOTE: You may want to place
(2) blocks for each side of
the chassis, to help hold it
centered in the cabinet. To
cut the wooden blocks to the
correct dimension, measure
the inside cabinet width,
subtract the width of the
chassis, and divide by 2
(See Figure D).
INSTALLING FROM
FRONT OF CABINET
#2
FIGURE D
BLOCKS
(NOT INCLUDED)