Installation Instructions

INSTALLATION INSTRUCTIONS: 432 SERIES FILLER PULLOUT 3
Clamp ller to cabinet, once
level attach using (4) screws
through pre-drilled holes.
Note: Align front of llers
with back of face frame (See
Fig. 4.1 and Fig. 4.2).
STEP 4
Pre-drill (2) 3/32” holes at
an angle through the top
and bottom edge of the
ller towards the adjacent
mounting cabinet (See Fig. 3.1
and Fig. 3.2).
STEP 3
FIGURE 3.1
FIGURE 3.2
FIGURE 4.1 FIGURE 4.2
Top of Filler
Bottom of Filler
Pre-Drill Holes
Pre-Drill Holes
3
32
#2