Installation Guide

Step 3 (Base Cabinets). Pre-drill 3/16
inch holes 3/8 inch down from top of
cabinet and also 27-3/4” down from
top of cabinet. (See g 4a–d). Repeat
with other adjacent cabinet.
Step 4. Mount ller cabinet pull-out to adjacent
cabinet 1. See Fig. 5a–b
Step 6. Remove front mounting
strap. See Fig 7a–b
Step 7. Attach face frame and onlays (not provided) See Fig. 8–9
Figure 4a Figure 4b
Figure 5a
Step 5. Mount ller
cabinet pull-out to
adjacent cabinet 2.
See Fig. 6
Figure 6
Figure 8 Figure 9
Figure 7a Figure 7b
Wall Cabinet
From inside the adjacent
cabinet screw the 432
cabinet top.
Screw 432 cabinet bottom from
below adjacent cabinet.
Base Cabinet
From inside and above the
adjacent cabinet floor scr
ew
the 432 cabinet bottom.
Screw 432 cabinet top from
above adjacent cabinet.
Figure 4d
Wall Cabinet
Figure 4c
Base Cabinet
Figure 5b
“Changing the way you think
about cabinet organization!”
Questions about installation visit
www.rev-a-shelf.com
or call customer service at
1-800-626-1126
Filler Cabinet
Base Cabinet
Scribe Rail Meets Face
Frame
Filler Cabinet
Base Cabinet
Scribe Rail Meets Face Frame