SDS
  Material safety data sheet 
Document Number: HFR-CQC-ZQ-0076       Revision:1/A          Page 4 of 5 
Effective Date:
expressed or implied, with respect to this information and disclaims all liabilities from reliance on it. 
Respiratory Protection:               Not required under normal use. 
Eye Protection:                  Not required under normal use. 
Gloves:                     Not required under normal use. 
Section X- Precautions for Safe Handling and Use 
Storage: Store in a cool place, but prevent condensation on cell or battery terminals. Elevated 
temperatures may result in reduced battery life. Optimum storage temperatures are between -31¡F 
and 95¡F. 
Mechanical Containment: If there are special encapsulations or sealing requirements, consult your 
representative about possible cell hazard precautions or 
limitations. 
Handling: Accidental short circuit will bring high temperature elevation to the battery as well as 
shorten the battery life. Be sure to avoid prolonged short circuit since the heat can burn attendant 
skin and even rupture of the battery cell case. 
Batteries packaged in bulk containers should not be shaken. Metal covered tables or belts used for 
assembly of batteries into devices can be the source of short circuits; apply insulating material to 
assembly work surface. If soldering or welding to the case of the battery is required, consult your 
representative for proper precautions to prevent seal 
damage or external short circuit. 
Charging: This battery is designed for recharging. A loss of voltage and capacity of batteries due to 
self-discharge during prolonged storage is unavoidable. Charge battery before use. Observe the 
specified charge rate since higher rates can cause a rise in internal gas pressure which may result in 
damaging heat generation or cell rupture and/or venting. 
Labeling: If normal label warnings are not visible, it is important to provide a device label stating: 
CAUTION: Do not dispose in fire, mix with other battery types, charge above specified rate, connect 
improperly, or short circuit, which may result in overheating, explosion or leakage of cell contents. 
Section XI – Measures for fire extinction 
In case of fire,it is permissible to use any of extinguishing medium on these batteries or 
their packing material .Cool exterior of batteries if exposed to fire to prevent tupture 
Fire fighters should wear self-contained breathing apparatus 
Section XII – Ecological information 
          N.A 
Section XIII - Recycling and Disposal 
encourages battery recycling. Our Nickel Metal Hydride batteries are not 
defined by the federal government as hazardous waste and are safe for disposal in the normal 
municipal waste stream. , 
DO NOT INCINERATE or subject battery cells to temperatures in excess of 212¡F. Such treatment 
can cause cell rupture. 
Anhui Innovation New Energy Co., Ltd
安徽亿诺新能源有限责任公司
Anhui Innovation New Energy Co., Ltd
Anhui Innovation New Energy Co., Ltd
05.08.2012
Anhui Innovation 






