User manual

Chapter 6 How to Charge Battery
IQSlate uses a rechargeable lithium battery as the wireless power source. You are
advised to fully charge the battery before using IQSlate. Charging IQSlate is simple.
You only need to connect IQSlate with your computer. IQSlate will take approximately
6 hours to charge.
If you have installed IQSlate driver on your computer, when you connect IQSlate with
your computer, the power indicator will show the battery status, as follows:
The 2 indicators are not
lighting or flashing
alternately
The red indicator is
continuously lighting
The green indicator is
continuously lighting
The battery is not installed The battery is fully charged The battery is charging
12