User manual

Step 3. Follow the on-screen instructions, press the center of each cross accurately

with the pen or finger tip.

Your whiteboard is now oriented.

Note:

1. If you did not locate the accurate central point or clicked the wrong point, or the next

fixed point appeared without press, please press “ESC” on the keyboard to exit this

orientation and re-orient. Otherwise you can’t operate the whiteboard accurately.

2. Please make your pen (finger) upright when orienting.

3. In case the relative position of the whiteboard and projector is changed, or the driver or

the monitor resolution is altered, please re-orient.

6.2 Hotkey Settings

At the first time you use the whiteboard with soft hotkeys, you need to set these

hotkeys.

Step 1. Select “Start > Programs > IQBoard IR & IR Pro Drivers > Soft Hotkey

Settings” to enter the setting window as follow.