User manual

Returnstar Interactive Technology Group Co., Ltd.
7
Connection Way 1:
Standard: 10m USB cable for connecting IQBoard with PC, external power is not
required.
Optional: USB signal amplifier to extend the USB cable to 20m and 2.4G radio
frequency wireless module with 25m effective transmission distance.
Connection Way 2:
Standard: 5m USB cable for connecting IQBoard with PC, external power is not
required.
Optional: 5m USB cable to extend the standard 5m USB cable to 10m and 2.4G radio
frequency wireless module with 25m effective transmission distance.
2.6 About Model
SD060, SD080, S100 and SD112 refer to IQBoard PS-D in relevant sizes, with
hotkeys and pen tray. B means wireless connection. N means hotkeys and pen tray
are not included. W means board surface supports normal pen writing. C means
IQBoard PS board with touch recognition. For example, SD080LCBNWY means 80
inch IQBoard PS-D adopting wireless connection, without hotkeys and pen tray,
supporting normal pen writing and touch recognition.
2.7 System Requirements
Windows XP/2003/Vista/7/8(32)
Intel C2.1 or higher
256 MB RAM or higher
1G free hard disk space (for full installation)
1 free USB port
1 projector (short focus or ultra-short focus projector recommended)
Note: Each board can only support one of these connection way when product. Please
do not miss use these two connection ways.