User manual

Returnstar Interactive Technology Group Co., Ltd.
20
Chapter 5 How to Install and Uninstall Driver
5.1 How to Install Driver
Run “IQBoard ET-D & PS-D Drivers V7.0.exe” in the installation CD, and install the
drivers according to the prompt. The computer will automatically find a new hardware
and install the driver.
After the installation is completed, if the indicator beside the USB connecting port
turns green, the whiteboard can be used normally. If the indicator turns red, it means
the USB cable is not well connected, please re-connect the USB cable or restart the
computer. If the indicator is not lighting, it means the USB cable is not connected.
Indicator is not lighting
Indicator turns red
Indicator turns green
USB cable is not
connected
USB cable is not well
connected, or the driver is not
correctly installed
The whiteboard works
normally
5.2 How to Uninstall Driver
Select “Start > Programs > IQBoard ET-D & PS-D Drivers > Uninstall” to uninstall. You
can also open Control Panel, select “Add/Remove Programs”, and in the list of
currently installed programs, select “IQBoard ET-D & PS-D Drivers”, then press the
“Change/Remove” button to remove the driver.
Note: You can install the driver under any Windows user account (Administrator, Guest,
or Limited User).