User manual

Returnstar Interactive Technology Group Co., Ltd.

Chapter 4 How to Connect to Computer and Projector

4.1 Wired Connection

After fixing the whiteboard, please plug USB Standard-B into Standard-B Receptacle

at right bottom of the backboard and Standard-A Plug into an available USB port of

computer, as follows. External power supply is not required. And please connect the

projector to the VGA port of your PC video card.

USB Standard-A Plug for connecting

computer

USB Standard-B Plug for connecting

whiteboard

4.2 Wireless Connection

If your product model is with a “B” in its hardware SN (refer to “2.7 About Model” for

detailed explanation for product model), you can also use Wireless Module for PC

connection. The connecting steps are as follows:

Step 1. After fixing the whiteboard, insert the round terminal of the 5V transformer into

a round jack on the controller, and insert the power plug of the 5V transformer into a

power socket.

Note: Please differentiate our hardware SN from software SN. The hardware SN is

for the whiteboard, whereas the software SN is for IQBoard Software. You can find the

hardware SN on the packing box, backboard and controller. The hardware SN is for you to

need remember to register within 4 months upon the date when the board is departed

from our factory. You can find the software SN on CD. The software SN is for you to