User manual

Returnstar Interactive Technology Group Co., Ltd.

Step 9. Align the Hexagon Bolt on the Column with the clip holes of Height Adjustable

Bracket on the backboard, and hang one side of whiteboard on the stand. Then adjust

the stand width to fit the whiteboard, and hang other side of the whiteboard on the

stand. Finally, tighten the bolts on the U-shaped Groove and Columns.

Fully assembled whiteboard is as follows:

Note:

1. You can use different clip holes of the Height Adjustable Bracket to adjust the whiteboard

height. Generally the bottom of the whiteboard should be 75-80cm above the ground.

2. For 50″ and 60″ whiteboards, you can hang the whiteboard on the first and second bolts

from top down on the Column. For 80″, 100″, 112″ and 120″ whiteboards, you can hang the

whiteboard on the first and third bolts from top down on the Column.