Returnstar Interactive Technology Group Co., Ltd. IQBoard PS-D V1.0 User Manual Copyright(C) 2003-2013 Returnstar Interactive Technology Group Co., Ltd. Web: www.recoverystar.com; www.iqboard.net Tel: 0086-591-87274373 Fax: 0086-591-87274383 E-mail: master@iqboard.
Returnstar Interactive Technology Group Co., Ltd. Statement This manual is for IQBoard PS-D V1.0. Both Whiteboard and Interactive Whiteboard in this manual refer to IQBoard PS-D. Colorless Writing Pen (or Finger) is used for IQBoard PS-D. Use this product strictly according to the detailed operation instruction in this manual so as to ensure proper use. Please read this manual carefully before you install this product.
Returnstar Interactive Technology Group Co., Ltd. TABLE OF CONTENTS STATEMENT ................................................................................................................................... 2 TRADEMARK NOTICE ................................................................................................................... 2 RECYCLING ....................................................................................................................................
Returnstar Interactive Technology Group Co., Ltd. 9.1 WHITEBOARD................................................................................................................................... 31 9.2 USB CABLE...................................................................................................................................... 32 9.3 PROJECTION ..................................................................................................................................... 32 9.
Returnstar Interactive Technology Group Co., Ltd. Chapter 1 Product Introduction IQBoard PS-D is available for Dual-user Mode. Two users can operate on the whiteboard simultaneously. IQBoard PS-D V1.0 is the latest interactive presentation whiteboard. Connect IQBoard PS-D with your computer and projector, then simply touch the projection area with your finger, you can transform your finger to Mouse and directly operate the computer on the projection area. With IQBoard PS-D and IQBoard Software V5.
Returnstar Interactive Technology Group Co., Ltd. Chapter 2 Specifications 2.1 Performance Resolution 9600×9600, 600dpi Precision 0.05mm 8m/s Signal Processing Rate 480 dots/s Signal Tracking Rate Orientation 4 or 12 points 2.2 Hotkeys 28 hotkeys are provided to achieve frequently used functions of IQBoard Software, 14 on each side of whiteboard surface or frame.
Returnstar Interactive Technology Group Co., Ltd. Connection Way 1: Standard: 10m USB cable for connecting IQBoard with PC, external power is not required. Optional: USB signal amplifier to extend the USB cable to 20m and 2.4G radio frequency wireless module with 25m effective transmission distance. Connection Way 2: Standard: 5m USB cable for connecting IQBoard with PC, external power is not required. Optional: 5m USB cable to extend the standard 5m USB cable to 10m and 2.
Returnstar Interactive Technology Group Co., Ltd. Chapter 3 How to Install IQBoard 3.1 Mount Whiteboard 3.1.1 For Product with an “M” in Its Hardware SN In case your product has an “M” in its hardware SN, you can select wall mounting. Parts list Picture Name Quantity Screw 4 Wall Anchor 2 Safety Bracket 2 Anchor Bolt 2 Wall Mounting Bracket (already mounted on the backboard) 2 Installation steps Step 1.
Returnstar Interactive Technology Group Co., Ltd. Note: For 112″ or 120″ whiteboard, 4 Anchor Bolts would be needed for installing the Wall Mounting Brackets. Step 2. Align the Wall Mounting Brackets on the backboard with the Anchor Bolts, and hang the whiteboard on the wall. Step 3. Fasten the 2 Safety Brackets on each side of whiteboard lower frame with 2 Screws. According to the location of the Safety Brackets, drill 2 mounting holes on the wall.
Returnstar Interactive Technology Group Co., Ltd. 3.1.2 For Product with a “Y” in Its Hardware SN In case your product has a “Y” in its hardware SN, you can select either wall mounting or stand mounting. 3.1.2.1 Wall Mounting Parts list Picture Name Screw Wall Anchor Quantity 4 2 2 Safety Bracket 4 Anchor Bolt Height Adjustable Bracket (already mounted on backboard) 4 Installation steps Step 1.
Returnstar Interactive Technology Group Co., Ltd. Note: The distance from floor to the 2 Anchor Bolts on top (Distance X) is 190cm. The vertical distance between 2 Anchor Bolts (Distance H) is 45cm for 50" and 60" whiteboards, and 75cm for 80", 100", 112" and 120" whiteboards. For the horizontal distance between 2 Anchor Bolts (Distance L), please measure horizontal distance of the 2 Height Adjustable Brackets on the backboard. Step 2.
Returnstar Interactive Technology Group Co., Ltd. 3.1.2.
Returnstar Interactive Technology Group Co., Ltd. Hexagon Bolt Set A (M8×50) (each set includes: 1 hexagon bolt, 1 wind nut, 1 M8 nut, 1 small washer and 1 big washer) 6 Hexagon Bolt Set B (M8×35) (each set includes: 1 hexagon bolt, 1 wind nut, 1 small washer and 1 big washer) 4 Anchor Bolt (M8×60) 4 Open-end Wrench 1 Installation steps Step 1. Install Column on each Leg Bar with Hexagon Bolt B. Step 2. Install one end of each Supporting Bar on each Leg Bar, using Hexagon Bolt A.
Returnstar Interactive Technology Group Co., Ltd. Step 3. Install the other end of each Supporting Bar on each Leg Bar, using Hexagon Bolt Set A. In this stage, please partially screw the bolt, leaving 4mm clearance between bolt head and Column for hanging whiteboard. Step 4. Install 2 Casters on each Leg Bar. Step 5. Install 2 Beams on each Column, using Hexagon Bolt C.
Returnstar Interactive Technology Group Co., Ltd. Step 6. Lay down and connect the 2 leg assemblies with the U-shaped Grooves. Step 7. Secure the U-shaped Grooves with Hexagon Bolt Set B. In this stage, do not completely tighten the bolt in order to adjust the stand width later. Step 8. Install 2 Hexagon Bolt Sets A on each Column, leaving 4mm clearance between bolt head and nut for hanging whiteboard.
Returnstar Interactive Technology Group Co., Ltd. Step 9. Align the Hexagon Bolt on the Column with the clip holes of Height Adjustable Bracket on the backboard, and hang one side of whiteboard on the stand. Then adjust the stand width to fit the whiteboard, and hang other side of the whiteboard on the stand. Finally, tighten the bolts on the U-shaped Groove and Columns. Note: 1. You can use different clip holes of the Height Adjustable Bracket to adjust the whiteboard height.
Returnstar Interactive Technology Group Co., Ltd.
Returnstar Interactive Technology Group Co., Ltd. Chapter 4 How to Connect to Computer and Projector 4.1 Wired Connection After fixing the whiteboard, please plug USB Standard-B into Standard-B Receptacle at right bottom of the backboard and Standard-A Plug into an available USB port of computer, as follows. External power supply is not required. And please connect the projector to the VGA port of your PC video card.
Returnstar Interactive Technology Group Co., Ltd. Step 2. Plug the following wireless adapter into an available USB port of computer. And please connect the projector to the VGA port of your PC video card. Note: 1.USB extender is strongly recommended if the distance between computer and whiteboard is too far or there are many obstacles (such as table, platform, etc.).
Returnstar Interactive Technology Group Co., Ltd. Chapter 5 How to Install and Uninstall Driver 5.1 How to Install Driver Run “IQBoard ET-D & PS-D Drivers V7.0.exe” in the installation CD, and install the drivers according to the prompt. The computer will automatically find a new hardware and install the driver. After the installation is completed, if the indicator beside the USB connecting port turns green, the whiteboard can be used normally.
Returnstar Interactive Technology Group Co., Ltd. Chapter 6 How to Setup IQBoard 6.1 Orientation At the first time you use IQBoard, you need to orient it, so the moving track of the colorless writing pen (finger) can match the cursor. For IQBoard PS-D, you can choose 4 or 12 points orientation. After the whiteboard is oriented, you don’t need to re-orient under the same environment. Please do as following steps when you orient the whiteboard: Step 1.
Returnstar Interactive Technology Group Co., Ltd. Step 3. Follow the on-screen instructions, press the center of each cross accurately with the colorless writing pen or finger tip. Your whiteboard is now oriented. Note: 1. If you did not locate the accurate central point or clicked the wrong point, or the next fixed point appeared without press, please press “ESC” on the keyboard to exit orientation and re-orient. Otherwise you can’t operate the whiteboard accurately. 2.
Returnstar Interactive Technology Group Co., Ltd. Note: 1. When setting the soft hotkeys, if some error occurs, you can press “ESC” key on the keyboard to exit the setting process, and then reset the hotkeys. 2. You don’t need to set the hard hotkeys. 6.3 Touch Recognition Settings Touch Recognition allows the whiteboard to sense the difference between a pen, finger and palm. You can write and draw with the pen, move objects with your fingers, and erase with your palm.
Returnstar Interactive Technology Group Co., Ltd. If the whiteboard often misinterprets your intent while using Touch Recognition function, you can customize its sensitivity to suit your style as follow. Teacher and student can set the sensitivity independently. Step 1. Every time you touch the whiteboard with your pen, finger or palm, the whiteboard acquires a value, based on which one of the 3 functions will be performed: Write, Select and Erase.
Returnstar Interactive Technology Group Co., Ltd. Chapter 7 How to Use IQBoard 7.1 Basic Operations For IQBoard PS-D, you can use the colorless writing pen or your finger to write or perform Mouse functions. Following are the tips for some basic operations: Single-click Press the surface with the colorless writing pen or finger tip at proper strength. Double-click Press the surface twice with the colorless writing pen or finger tip at proper strength. Please make sure you press at the same point.
Returnstar Interactive Technology Group Co., Ltd. whiteboard in digital ink. Perform mouse function When pressing interactive whiteboard with your fingers, you can move object and perform other mouse function with your fingers. Erase content When pressing interactive whiteboard with your palm, you can erase digital ink on the interactive whiteboard. Activate IQBoard Software If IQBoard Software hasn’t been activated, you can press interactive whiteboard with your palm to activate it.
Returnstar Interactive Technology Group Co., Ltd. 7.3 How to Use Hotkeys on Whiteboard Following is the introduction of the above hotkeys. Add Page : In Windows Mode, press this key to clear all annotations on screen. In Board Mode, press this key to add a new page in current .cdf file. Save File : In Windows Mode, press this key to save all annotations on screen to a page in current file. In Board Mode, press this key to save the current .cdf file.
Returnstar Interactive Technology Group Co., Ltd. : There are four “Pen” keys in different colors on the hotkey bar. Pen Press one of these keys, you can write on the board in corresponding color. Press “Pen” twice to modify its properties. Eraser : Press this key, you can erase the writing content on board. In Windows Mode, press this key twice to popup the “Shut Down Windows” window.
Returnstar Interactive Technology Group Co., Ltd. Chapter 8 FAQ 1. The whiteboard indicator is not lighting or turns red, or the hotkey is not functioning. 1) The USB cable is not well connected with whiteboard or computer, please check and re-connect. 2) The USB port is damaged, please try another one. In case you are using desktop computer, please use its rear USB port.
Returnstar Interactive Technology Group Co., Ltd. layer may stick together, leaving a constant sensing point. 4. When operating and writing on the whiteboard, the position of pen or finger doesn’t match the position of cursor. 1) The relevant location of projector and whiteboard has been changed. Please readjust the projection area, and then re-orient the whiteboard. 2) The projection area has trapezoid distortion, please adjust the projection area, and re-orient the whiteboard.
Returnstar Interactive Technology Group Co., Ltd. Chapter 9 Cautions and Maintenance 9.1 Whiteboard For the interactive whiteboard that do not support normal marker (no “W” included in the product model), please try not to use normal marker to write on the surface. Before cleaning, please shut down the computer and switch the projector into standby mode to make the dirt more obvious. In case of normal dirt, spray some water or detergent on the surface, then use the paper to wipe the dirt out.
Returnstar Interactive Technology Group Co., Ltd. and water. Please do not put the whiteboard in the outlet of hot air, otherwise the material will deteriorate and its life-span will be shortened. To avoid harm from improper operation, please do not use chair or other tool to help short students use the whiteboard. If students are not tall enough to use the whiteboard, please low down the whiteboard under the help of the professional technician. 9.
Returnstar Interactive Technology Group Co., Ltd. prevent accident or trouble. For maintenance or part replacement, please resort to our authorized technician. Make sure that you use our designated part or the one with the same specification when replacing.
