Returnstar Interactive Technology Group Co., Ltd. IQBoard DVT V7.0 (Digital Vision Touch Interactive Whiteboard) User Manual Copyright(C) 2003-2013 Returnstar Interactive Technology Group Co., Ltd. Web: www.recoverystar.com; www.iqboard.net Tel: 0086-591-87274373 Fax: 0086-591-87274383 E-mail: master@iqboard.
Returnstar Interactive Technology Group Co., Ltd. Statement This manual is for IQBoard DVT V7.0. Use this product strictly according to detailed operation instruction in this manual so as to ensure proper use. Please read this manual carefully before you install this product. Opening the package means you have agreed to purchase this product, Returnstar will not accept returns of opened packages. The product specification may be subject to change without prior notice.
Returnstar Interactive Technology Group Co., Ltd. CONTENT CHAPTER 1 PRODUCT INTRODUCTION ............................................................................................... 4 CHAPTER 2 SPECIFICATIONS ............................................................................................................... 5 2.1 PERFORMANCE ................................................................................................................................... 5 2.
Returnstar Interactive Technology Group Co., Ltd. Chapter 1 Product Introduction IQBoard DVT is the latest interactive presentation boards. Connect IQBoard DVT with your computer and projector, then simply touch the projection area with your pen or your finger, you can transform the pen or your finger to Mouse and directly operate the computer on the projection area. IQBoard DVT supports Dual-user Mode, i.e. two users can operate on the board simultaneously by entering Dual-mode in IQBoard Software.
Returnstar Interactive Technology Group Co., Ltd. Chapter 2 Specifications 2.1 Performance Resolution: 32768×32768; Signal tracking rate: 8m/s; Signal processing rate: 480 dots/s; Orientation: 4, 9 or 20 points 2.2 Flexible Fixing and Relocating Methods Fixing methods include wall hanging, cabinets, and mobile stand. Provide optional height adjustable mobile stand for 50-120 inch whiteboards, the height can be adjusted from 1.88M to 2.12M. Other sizes of board can be customized. 2.
Returnstar Interactive Technology Group Co., Ltd. Chapter 3 How to Install IQBoard Choose a mounting way from below according to your board module. 3.1 Mount Whiteboard （Wall Mounting Bracket） Parts list Picture Name Quantity Screw 4 Wall Anchor 2 Safety Bracket 2 Anchor Bolt 2 Wall Mounting Bracket (already mounted on the backboard) 2 Installation steps Step 1.
Returnstar Interactive Technology Group Co., Ltd. Wall Mounting Brackets symmetrically on the backboard to keep the balance (as shown in the figure). Step 3. Align the Wall Mounting Brackets on the backboard with the Anchor Bolts, and hang the whiteboard on the wall. Step 4. Fasten the 2 Safety Brackets on each side of whiteboard lower frame using 2 Screws. According to the location of the Safety Brackets, drill 2 mounting holes on the wall.
Returnstar Interactive Technology Group Co., Ltd. 3.2 Wall Mounting（L-type Bracket） Parts list No. Picture Item Qty 1 Flat Cross-tapping Screw 8 2 Wall Anchor 8 3 IQBoard L-type Bracket 4 4 EVA Pad 4 Installation steps Step 1. Determine the fixed position and height of the IQBoard according to the actual use of the site. Step 2. Determine the installation height of the bottom L-type Brackets according to the location of IQBoard on the wall.
L H1 H2 Returnstar Interactive Technology Group Co., Ltd. Note: L: Horizontal distance between 2 upper/bottom brackets. H1: Distance between the 2 screws on the same bottom bracket. H2: Distance between the screw on the upper bracket and the upper screw on the bottom bracket. Note: Please measure L, H1 and H2 according to your own IQBoard size. Step 3. Put EVA pad into the inside of L-type bracket.
Returnstar Interactive Technology Group Co., Ltd. h of the upper bracket, two for each of the lower one.) Step 4. Drill 6 holes(70mm in depth) by a 6mm electric drill on the positions of the 6 screws you determined as per above. (2 holes for each of bottom bracket; 1 hole for each of upper bracket) Step 5. Put a Wall Anchor into each hole, and screw the brackets with M4*70 flat cross-tapping screw. Step 6. Put IQBoard on the fixed 4 L-type Brackets, and let it centered horizontally.
Returnstar Interactive Technology Group Co., Ltd.
Returnstar Interactive Technology Group Co., Ltd. Step 2. Install one end of each Supporting Bar on each Leg Bar, using Hexagon Bolt A. Step 3. Install the other end of each Supporting Bar on each Leg Bar, using Hexagon Bolt Set A. In this stage, please partially screw the bolt, leaving 4mm clearance between bolt head and Column for hanging whiteboard. Step 4. Install 2 Casters on each Leg Bar.
Returnstar Interactive Technology Group Co., Ltd. Step 5. Install 2 Beams on each Column, using Hexagon Bolt C Step 6. Lay down and connect the two leg assemblies with U-Shaped Grooves. Step 7. Secure U-Shaped Grooves with Hexagon Bolt Set B. In this stage, do not completely tighten the bolt in order to adjust the stand width later. Step 8. Install 2 Hexagon Bolt Sets A on each Column, leaving 4mm clearance between bolt head and nut for hanging whiteboard.
Returnstar Interactive Technology Group Co., Ltd. Step 9. Fix 4 Brackets on screws on backboard according to the vertical height of Hexagon Bolt Sets A. Please make sure to fix the Brackets symmetrically on the backboard to keep the balance (as shown in the figure). Note: You can adjust the height of whiteboard by screwing the Brackets on different height of backboard (The distance between lower frame of whiteboard and floor is 75-80cm recommended). Step 10.
Returnstar Interactive Technology Group Co., Ltd.
Returnstar Interactive Technology Group Co., Ltd. Chapter 4 How to Connect to Computer and Projector After fixing the whiteboard, find a connecting port at the bottom of left corner protector. Plug the USB Standard-B into the connecting port, and plug the USB Standard-A into the available USB port of computer, as follows. External power source is not required. And please connect the projector into the VGA port of your PC video card.
Returnstar Interactive Technology Group Co., Ltd. Chapter 5 How to Install and Uninstall Driver 5.1 How to Install Driver Run “IQBoard DVT Drivers V7.0.exe” in the installation CD, and install the drivers according to the prompt. The computer will automatically find a new hardware and install the driver. 5.2 How to Uninstall Driver Select “Start > Programs > IQBoard DVT Drivers >Uninstall” to uninstall.
Returnstar Interactive Technology Group Co., Ltd. Chapter 6 How to Setup IQBoard 6.1 Orientation At the first time you use IQBoard, you need to orient it, so the moving track of the pen (finger) can match the cursor. You can select 4 points, 9 points or 20 points orientation. Normally 9 points orientation is adopted. After the whiteboard is oriented, you don’t need to re-orient under the same environment. To orient the whiteboard Please do as following steps when you orient the whiteboard: Step 1.
Returnstar Interactive Technology Group Co., Ltd. Step 3. Follow the on-screen instructions, press the center of each cross accurately with the pen or finger tip. Your whiteboard is now oriented. Note: 1. If you did not locate the accurate central point or clicked the wrong point, or the next fixed point appeared without press, please press “ESC” on the keyboard to exit this orientation and re-orient. Otherwise you can’t operate the whiteboard accurately. 2.
Returnstar Interactive Technology Group Co., Ltd. Note: When setting the soft hotkeys, if some error occurs, you can press “ESC” key on the keyboard to exit the setting process, and then reset the hotkeys.
Returnstar Interactive Technology Group Co., Ltd. Chapter 7 How to Use IQBoard 7.1 Basic Operations For IQBoard DVT, you can use the enclosed pen or your finger to write or perform Mouse function. Following are the tips for some basic operations: Single-click If you use pen or finger, press the surface with the pen or finger tip at proper strength. Double-click If you use pen or finger, press the surface twice with the pen or finger tip at proper strength. Please make sure you press at the same point.
Returnstar Interactive Technology Group Co., Ltd. 7.2 How to Use Hotkeys on Whiteboard Following is the introduction of above soft hotkeys. Add Page : In Windows Mode, press this key to clear all annotations on screen. In Board Mode, Press this key to add a new page in current .cdf file. Save File : In Windows Mode, press this key to save all annotations on screen to a page in current file. In Board Mode, press this key to save the current .cdf file.
Returnstar Interactive Technology Group Co., Ltd. frequently used tools in IQBoard Software. You can add up to 8 shortcut icons in this bar. Applications : Press this key to popup a quick access bar including shortcut icons for frequently used applications. You can add up to 8 shortcut icons in this bar. Start : Press this key to start the IQBoard Software. Orient : Press this key to popup the 9 points orientation interface. Note: 1.
Returnstar Interactive Technology Group Co., Ltd. 7.3.2 Customize Touch Recognition Sensitivity If the whiteboard often misinterprets your intent while using Touch Recognition function, you can customize its sensitivity to suit your style as follow. Step 1. Every time you touch the whiteboard with your pen, finger or palm, the whiteboard acquires a value, based on which one of the 3 functions will be performed: Write, Select and Erase. Move the 2 sliders to change the value range for these 3 functions.
Returnstar Interactive Technology Group Co., Ltd. Step 2. Test the sensitivity of Touch Recognition by pressing the testing area with pen, finger and palm. If the whiteboard misinterprets your intent, adjust the sliders as detailed above. Step 3. Click “OK” to save your settings. To reset Touch Recognition's sensitivity to default settings, click “Reset to Default”. 7.3.
Returnstar Interactive Technology Group Co., Ltd. Note: 1. When you want to erase content, we recommend you pressing interactive whiteboard with your palm. When you want to perform mouse function, we recommend you pressing interactive whiteboard with two fingers closed. 2. Freehand Drawing Tool and Eraser are Pencil and Normal Eraser by default. If you have selected other Freehand Drawing Tool or Eraser before, IQBoard Software will use your previous selections. Chapter 8 FAQ 1.
Returnstar Interactive Technology Group Co., Ltd. 1) The computer is not under normal running or the memory is occupied too much. Please close some applications or restart the computer. 2) The operating or writing force is uneven. Sometimes the force is too light to be sensed. 3) Initializing hardware failed. Please reconnect the cable with the board to initialize the hardware again. 4. When I operate and write on the IQBoard DVT, the system doesn’t respond.
Returnstar Interactive Technology Group Co., Ltd. Chapter 9 Cautions and Maintenance 9.1 Whiteboard For the interactive whiteboard that do not support normal marker (no “W” included in the product model), please try not to use normal marker to write on the surface. Before cleaning, please shut down the computer and switch the projector into standby mode to make the dirt more obvious. In case of normal dirt, spray some water or detergent on the surface, then use the paper to wipe the dirt out.
Returnstar Interactive Technology Group Co., Ltd. To avoid harm from improper operation, please do not use chair or other tool to help short students use the whiteboard. If students are not tall enough to use the whiteboard, please low down the whiteboard under the help of the professional technician. 9.2 USB Cable Do not put the USB cables on the floor where people might stumble over them. If you have to do so, straighten them and use insulated adhesive tape or cable with contrast color to tie them up.
