User manual

To enable Touch Recognition function
1. Select “Start > Programs > IQBoard ET & PS Drivers >Touch Recognition Setting”.
2. Select the Enable Touch Recognition of IQBoard PS V7.0 check box.
After you enable the Touch Recognition, you can use this function. When using this
function, if the
whiteboard often misinterprets your intent, you can customize Touch
Recognition's sensitivity to suit your style.
Before set up touch recognition function, please specify the whiteboard size. The default
setting is 60-80 inch whiteboard.
To customize the Touch Recognition's sensitivity:
1. Every time you touch the whiteboard with your pen, finger or palm, the whiteboard
acquires a value, based on which one of the 3 functions will be performed: Write, Select
and Erase. Move the 2 sliders to change the value range for the 3 functions. The wider the
value range, the easier you can perform the related function.
2. Test the Touch Recognition’s sensitivity by pressing the testing area with pen, your
finger and palm. If the whiteboard misinterprets your intent, adjust the sliders as detailed
above.
3. Click “Ok” to save your settings.
To reset Touch Recognition's sensitivity to default settings, click “Defaults”.