User manual

Chapter 6 Setup IQBoard
6.1 Orient IQBoard
At the first time you use the whiteboard, you need to orient it, so the moving track of
the electronic pen or writing pen (finger) can match the cursor. You can select 4 points,
9 points or 20 points orientation. Normally 9 points orientation is adopted. After the
whiteboard is oriented, you don’t need to re-orient at the same environment.
To orient the whiteboard
1. Do one of the followings:
Select “Start > Programs > IQBoard ET & PS Drivers >Orient”
If your whiteboard includes hotkeys, press “
” in the hotkey bar.
The Orient Precision Selection window appears.
2. Select Orientation Points and click “Ok”, the orientation interface appears.