User manual

Fully assembled whiteboard is as follows:
3.2 Install Battery of Electronic Pen
1. Unscrew the battery cap by turning it counterclockwise.
2. Insert 1 AAA battery with the plus (+) side up.
Prompt
1. You can use different clip holes of the Height Adjusting Bracket to adjust the whiteboard
height. Generally the bottom of the whiteboard should be 70-80cm above the ground.
2. For 50 and 60 inch whiteboard, you can hang the whiteboard on the first and second bolts
from top down on the Column. For 80, 100, 112, and 120 inch whiteboard, you can hang the
whiteboard on the first and third bolts from top down on the Column.