User manual

Returnstar Interactive Technology Group Co., Ltd.
9
3.2 Remote Controller Installation
Battery Installation
1. Pull the back cover of the battery on the remote controller.
2. Input two cells 1.5V AAA battery; make sure the polar of the battery (+/-) matching
with direction on the controller.
3. Pull back the cover until you hear tick sound.
Attentions to Use Battery
● Do not mix use the new and used battery together.
● Do not mix use different types of battery (e.g. manganese and alkali battery).
● There are two types of battery – rechargeable and non-rechargeable, do not try to
charge for non-rechargeable battery.
● If long time not to use the remote controller, please get out the batteries.
Attentions to Use Remote Controller
● No drop.
● No physical impact of the remote controller.
● Put the controller in dry and cool environment, or it will be easily damaged.
● Replace the battery in time when power is low.
3.3 Accessories
● Power Plug and Cable
● VGA Cable
● Remote Controller