User Manual

Wireless Grinding Jar Cover
30
Green flashing (measurement was started
and measurement values are being transmitted)
Pos: 8.11 /00020 BDA Softwar e/20005 PMGC K apitelsammlung/Ü berschrifte n/1.1 Überschrift en/11 Reinigung der Luftkanäle des Druckse nsors @ 0\ mod_1216716068 719_9.doc @ 2046 @ @ 1
6.5 Cleaning the Air Duct in the Pressure Sensor
Pos: 8.12 /00020 BDA Softwar e/20005 PMGC K apitelsammlung/F unk Mahlbec herdeckel/Mod ul Reinigung der Luftkanäle Druc ksensor @ 0\ mod_121671 5881345_9.doc @ 2040 @ @ 1
The air ducts (20) in the pressure sensor can be cleaned with a vacuum cleaner
too if they get dirty.
Fig. 19: Air ducts
Pos: 8.13 /00020 BDA Softwar e/20005 PMGC K apitelsammlung/Ü berschrifte n/1.1 Überschrift en/11 Begasungs -Funktio n @ 0\mod_1208 936499587_9.d oc @ 493 @ @ 1
6.6 Gassing Function
Pos: 8.14 /00020 BDA Softwar e/20005 PMGC K apitelsammlung/F unk Mahlbec herdeckel/Mod ul die Begasungsf unktion @ 0\ mod_12148 24967809_9.doc @ 1830 @ @ 1
To enable the PM GrindControl to be used for grinding in a controlled atmosphere
also, the kit contains a cover baseplate with venting holes for the gassing function
(centring plate with venting holes).
When using the gassing function, make sure the gassing channels are free.
The venting holes can also be cleaned with a vacuum cleaner too if they get dirty.
Pos: 8.15 /00020 BDA Softwar e/20005 PMGC K apitelsammlung/ - - - - Seiten umbruch - - - - @ 0\mod_1208 857688413_0.d oc @ 337 @ @ 1
20