User Manual

Technical Data
10
Pos: 5.3 /00020 BD A Software/2 0005 PMGC Ka pitelsammlung/Ü berschriften/1. 1 Überschrift en/11 Transport und Lagerung @ 0\mod_12 16808117898 _9.doc @ 2072 @ @ 1
3.2 Transport and Storage
Pos: 5.4 /00020 BD A Software/2 0005 PMGC Ka pitelsammlung/ 0006 Kapitel Tra nsport und Lie ferumfang/Modul Tr ansport und Lagerung @ 0\mod_1216 808076180_9. doc @ 2078 @ @ 1
3.2.1 Packaging
The packaging has been adapted to the mode of transport. It complies with the
generally applicable packaging guidelines.
Please retain the packaging for the duration of the warranty period because
returning in unsuitable packaging in the event of a complaint can jeopardize your
warranty claims.
3.2.2 Transport
Do not subject the PM GrindControl to impacts, jolts or vibrations during
transportation as this can damage the electronic and mechanical components.
3.2.3 Temperature Fluctuations
Where temperature fluctuates greatly (during shipment by air, for instance), protect
the PM GrindControl from condensation. The electronic components could
otherwise be damaged.
Pos: 5.5 /00020 BD A Software/2 0005 PMGC Ka pitelsammlung/Ü berschrifte n/1.1 Überschrift en/11 Pflegehin weise und Lag erung @ 0\mo d_121731754 6169_9.doc @ 2 150 @ @ 1
3.3 Care Instructions and Storage
Pos: 5.6 /00020 BD A Software/2 0005 PMGC Ka pitelsammlung/ 0006 Kapitel Tra nsport und Lieferumfang/M odul Pflege der D eckelgrundpla tten @ 0\mo d_121482641 3589_9.doc @ 18 49 @ @ 1
The two cover baseplates are made of hardened stainless steel (1.4034).
Hardened steel has a lower chromium content and so it does not form any oxide
protective layer. Therefore, it distinguishes itself not by its corrosion resistance, but
by its greater hardness.
We therefore use a special oil to protect these grinding tools. Please remove the oil
before using it the first time; water and detergent are enough for this purpose.
Please dry the grinding tool well.
After the grinding operations, the grinding tools must be cleaned in as dry a state
as possible. However, if they are extremely dirty, they can be cleaned with a damp
cloth and some household detergent. It is important to ensure sufficient drying.
If the grinding tools are to be stored for a long time, we recommend the use of a
corrosion protection oil. If corrosion occurs nonetheless, it can be removed with
household scouring agents.
Also recommendable for long-time storage is to store the parts in the
accompanying VCE bags. (blue plastic bags).
Caution – Damage to electronic components!
Do not clean the radio grinding jar cover under running water.
Pos: 6.1 /00020 BD A Software/2 0005 PMGC Ka pitelsammlung/- - - - Seitenu mbruch - - - - @ 0\mod_12088 57688413_0.doc @ 337 @ @ 1