Manual

Control panel software – controlling the device
47
– The grinding parameters of the individual programs cannot be changed in
the sequence mode. To do this, switch to the program mode.
6.7.1 Creating or editing a sequence
6.7.2 Sequence description and heading
You can allocate each of the three sequences its own heading and a detailed
description.
• Tap on the icon (B5.1).
All other steps are the same as those explained in the Program description and
heading chapter.
6.7.3 Selecting a saved sequence
• Tap on the headings field (B5.4).
– The sequence selection window opens.
– The current sequence is shown with a grey background.
22.04.2014
14:23
SEQUENCE
65°C
Temperature
01:00:00
Process time
1 | Program 5 | P5
2 | Grinding 0001 | P1
3 | Intermediate program | P3
4 | Grinding 0001 | P1
5 | Intermediate program | P3
6 | Intermediate program | P3
7 | Program 5 | P5
OPEN
START
1 | Retsch sequence
B5.1
B5.5
B5.8
B5.2
B5.4
70 C°
50 C°