Manual

Operating the machine

• Pull out the locking pin (D) to release from the groove (DN).

• Twist the locking pin 90 degrees to release it permanently.

• Turn the twist grip (C) to open the grinding jar support.

• Only remove the grinding jar with closed lid.

• Only open the grinding jar in a safe position (e.g. extraction device).

• Only open the grinding jar once it has cooled down.

Fig.

: Removing the grinding jar

5.5.2 Closing

With this grinding device, a very large amount of energy enters the sample

material.

• Therefore make sure that the grinding jar support has been closed properly.

• Before grinding check the lock on the grinding jar support (V).

Fig.

: Locking the grinding jar support

The twist grip (C) of the grinding jar support (G) is secured by locking pin (D) to

prevent inadvertent opening.

• Twist the locking pin (D) until it engages in the groove (DN).