User guide

ManualsBrandsRetsch ManualsEquipmentDR 100

Operating the machine

Fig. 24: Interface on the PT200

Pos: 9.26 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Betrie bsart standar d @ 4\mod _133251082336 2_9.doc @ 27440 @ 2 @ 1

5.11 Standard operating mode

Pos: 9.27 /00010 Bedienungsa nleitungen Kapitels ammlungen/DR 100_2012/00 07 DR100_201 2 Bedienung/0 045 DR100 Mo dul Modus sta ndard @ 4\mo d_133214840 0443_9.doc @ 2 7124 @ @ 1

• Set the operating mode selector switch (H) on the back of the device to

standard.

• Switch the device on at the mains switch (J).

The DR 100 is in stand-by mode.

– You can see the previous values set for feed in the time and speed display.

All functions on the keyboard are enabled.

NOTE

If the DR100 is connected to a ZM200 via the interface (I), only the vibration

intensity can be adjusted using the knob (Dk).

Pos: 9.28 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Betrie bsart extern @ 4\mod_1 332511275080_9. doc @ 27464 @ 2 @ 1

5.12 External operating mode

Pos: 9.29 /00010 Bedienungsa nleitungen Kapitels ammlungen/DR 100_2012/00 07 DR100_201 2 Bedienung/0 075 DR100 Mo dul Modus ext ern @ 4\mod_1 332148394329 _9.doc @ 270 34 @ @ 1

Fig. 25:

• Set the operating mode selector switch (H) on the back of the device to

external.

Only the adjustment of the feed speed is available in this mode.

Pos: 9.30 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Aust ausch der Ger ätesicherung en @ 0\mod_ 1228833758657_ 9.doc @ 4426 @ @ 1