User guide

Operating the machine
25
Fig. 17: Setting the feed speed
• Turn the knob (Dk) anticlockwise until the speed “00” can be seen.
• Press the START button (Dg).
– The vibrating chute vibrates genttly.
• Turn the knob (Dk) clockwise until reaching the desired feed speed.
The device conveys the feed material placed on it into the receiving vessel or
device you have provided.
The feed speed is determined by the change in the power supply on the installed
directional throw vibrator of the DR 100 (phase angle control).
The setting is made using the knob (Dk)
• Turning to the right increases the speed
• Turning to the left decreases the speed
NOTE
The message in the speed display is only intended as setting aid and is not
reproducible because:
- The supply voltage is usually not stable
- The output of the directional throw vibrator changes according to operating
duration due to heating or cooling.
Pos: 9.20 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Start en, Unterbr echen, Stoppen @ 0\mod_122 9417133049_9. doc @ 5070 @ @ 1
5.8 Starting, Interrupting, Stopping
Pos: 9.21 /00010 Bedienungsa nleitungen Kapitels ammlungen/DR 100_2012/0 007 DR100_20 12 Bedienung/0 065 DR100 Mo dul Zuteilung unterbrechen weit erführen abbrec hen @ 4\ mod_13321484 02913_9.doc @ 27160 @ 333 @ 1
Dg
Dr
Dk
Dg