User Manual

Operating the machine

Fig. 48: Replacing the device fuses

The following glass fuses are needed for the CryoMill:

2 T4A

• Pull the mains plug from the connector (M).

• Press in the catch at the side. This releases the fuse holder (L) so that it

can be pulled out.

• Replace the fuses.

• Push the fuse holder (L) in until it engages.

Pos: 7.1 /00010 B edienungsanlei tungen Kapitelsa mmlungen/------- Seitenumbr uch ----------- @ 0\mod_12223443737 58_0.doc @ 238 6 @ @ 1