User Manual

Operating the machine
44
Fig. 40: Starting the grinding process
• Press the START button to start the grinding process.
– The Start LED (green) lights up. At the same time the solenoid valve opens
and liquid nitrogen can flow into the cooling system.
Pos: 6.49 /00005 Ü berschriften/ 1.1 Überschrift en/1.1 Übersc hriften BDA/11 Ma hlvorgang unter brechen und weiterführen @ 1 \mod_1241 510629134_9.d oc @ 8833 @ @ 1
5.14 Interrupting and continuing the grinding process
Pos: 6.50 /00010 Bedienungsa nleitungen Kapitels ammlungen/Cr yoMill II/0007 B edienung/0026 Cr yoMill II Mod ul Pausenfun ktion @ 5\m od_1345098786 153_9.doc @ 3 4130 @ @ 1
5.14.1 Pausing grinding
Fig. 41: Pausing grinding
• Press the STOP button (B13) once.
– Grinding is interrupted and the LED above the START button flashes.
5.14.2 Cancelling grinding
Fig. 42:
• Press the STOP button (B13) twice.
– The grinding is ended and the two LEDs above the START and STOP
buttons are off.
Pos: 6.51 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Ma hlvorgang sto ppen @ 0\ mod_1226909892 231_9.doc @ 3643 @ @ 1
5.15 Stopping the grinding process
Pos: 6.52 /00010 Bedienungsa nleitungen Kapitels ammlungen/Cr yoMill II/0007 B edienung/0021 Cr yoMill II Mod ul Stoppen des Ma hlvorg anges @ 5\mod _1343829257 317_9.doc @ 33 367 @ @ 1
B13
B13
B13