User Manual

Operating the machine
42
– The auto precooling (ap) LED is lit up.
– “Auto” is shown in the time min display.
Switch automatic precooling off
• Press the button (B10) for at least 2 seconds.
– The auto precooling (ap) LED is extinguished.
– “08:00" is shown in the time min display.
Pos: 6.39 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Ma hldauer einstelle n @ 0\ mod_122690845696 5_9.doc @ 35 82 @ @ 1
5.10 Setting the grinding time
Pos: 6.40 /00010 Bedienungsa nleitungen Kapitels ammlunge n/CryoMill II/0007 Bedienung/0 015 CryoMill II Mo dul Mahldauer einstellen @ 5 \mod_1343 829251134_9.d oc @ 33301 @ @ 1
Fig. 37: Setting the grinding time
• Press the button (B11) to set the grinding time.
The grinding time LED lights up.
• Use the buttons (B9) to set the grinding time
(5 to 30 Hz in 1Hz steps).
– + Pressing briefly increases the duration.
– - Pressing briefly shortens the duration.
The display runs more quickly when pressed longer.
NOTICE
In the case of grinding without cooling, the grinding time can be set directly using
the buttons (B9).
Pos: 6.41 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Dau er der Zwisch enkühlung einstelle n @ 0\ mod_12271851 84595_9.doc @ 3873 @ @ 1
5.11 Setting the duration of intermediate cooling
Pos: 6.42 /00010 Bedienungsa nleitungen Kapitels ammlungen/Cr yoMill II/0007 B edienung/0006 Cr yoMill II Mod ul Dauer der Z wischenkü hlung einstellen @ 5\mod_1343 829237941_9.d oc @ 33202 @ @ 1
Fig. 38: Setting the intermediate cooling
B12
B9
LED
B11
B9
LED