User Manual

Transport, scope of delivery, installation
19
11 Capacity
12 Amperage
13 Number of fuses
14 Fuse type and fuse strength
In the case of questions please provide the device designation (1) or the part
number (3) and the serial number (4) of the device.
Pos: 5.25 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 El ektrischer Ansc hluss @ 0\mo d_122656506 7445_9.doc @ 3 500 @ 2 @ 1
4.8 Electrical connection
Pos: 5.26 /00003 Standard Kapitel/ General Modul Elektrischer Anschluss @ 0\ mod_12289 18538521_9.doc @ 4731 @ @ 1
WARNING
When connecting the power cable to the mains supply, use an external fusethat
complies with the regulations applicable to the place of installation .
• Please check the type plate for details on the necessary voltage and
frequency for the device.
• Make sure the levels agree with the existing mains power supply.
• Use the supplied connection cable to connect the device to the mains power
supply.
Pos: 5.27 /00010 Bedienungsa nleitungen Kapitels ammlungen/Cr yoMill II/0006 Tr ansport, Lief erumfang und Aufs tellen /CryoMil l II Modul e xterne Absicher ung @ 5\mod _1343829054 956_9.doc @ 33 059 @ @ 1
The external fuse must be at least T6.3A (230V) T8A (100/120V).
Pos: 5.28 /00004 Warnhinweis e/W0002 WARNUN G Kabelbruc h Stromstoß @ 2\mod_12 78055276120_9.d oc @ 20557 @ @ 1
WARNING
Risk of a fatal electric shock
- An electric shock can cause injuries in the form of burns and cardiac
arrhythmia, respiratory arrest or cardiac arrest.
• Do not clean the blender under running water. Use only a cloth dampened
with water.
• Disconnect the power supply plug before cleaning the blender.
Pos: 5.29 /00004 Warnhinweis e/H0008 HINW EIS Elektrischer A nschluss @ 0 \mod_1228 918882424_9.d oc @ 4781 @ @ 1
NOTICE
Electrical connection
– Mechanical or electronic components may be damaged.
• Please observe the information on the type plate.
Pos: 5.30 /00005 Ü berschriften/ 1.1 Überschrift en/1.1 Übersc hriften BDA/11 K ühlmittelzufluss anschließen @ 0\mod_12269 08410419_9. doc @ 3576 @ @ 1
4.9 Connecting the cooling agent feed
Pos: 5.31 /00004 Warnhinweis e/H0062 HINW EIS Risiko der Eisbil dung (Cr yoMill) @ 4\ mod_1314082100 670_9.doc @ 25455 @ @ 1