retrospect PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE USE & REFERENCE. DO NOT DISCARD. A WARNING: Serious injuries and even death can ASSEMBLY INSTRUCTIONS occur if the proper safety precautions are not followed. BARRON COMFORT HYBRID TOOLS 0 Woe supply: 2 Allen Wrenches (5mm, & émm}. a 10-function multi-tool You supply: Scissors or diagonal cutters, Phillips Screwdriver. 15mm open end wrench or adjustable wrench STEP 1: UNPACKING YOUR BIKE P Front 1 Cut the shipping straps on the outside of the box.
STEP 4: FRONT WHEEL 1 Flip the bike over so it's resting on the saddle and handlebars. 2 Remove the small black plastic protector from the fork dropouts. 3 Loosen the axle nuts on the front wheel and insert the front wheel! into the fork dropouts. Insert the tab of the safety washers into the small holes on the outside of the fork dropouts. (Fig. 8) 4 Inspect the wheel to make sure it is centered in the fork (Fig. 9}.
STEP 8: REFLECTORS 1 Attach the plastic bracket to the handlebar and seat post {Fig. 15HFig. 16). 2 Slide the white reflector onto the bracket. It should click as it locks In place. 3 Attach the wheel reflectors onto the spokes of the wheels (these may already come installed by the factory).
