Installation guide
•
Thank you for your purchase
of
our Retro Classic Radio!
We
hope it will provide
you with years
of
enjoyment. Below are some features
of
this unit:
• LCD Display
wI
enhanced viewing angle & daylight compatible
• AM/FM PLL tuner
wI
30
presets & RDS
• 50W x 4 RMS 100W X 4 MAX POWER (Integrated amplifier)
• 2 pair RCA pre-amp outputs
to
add external amplifiers
• Patent Pending INFINIMOUNT adjustable shaft
& bracket system
• Front aux input; plug
in
any MP3 player or other portable device, (cell phone, etc)
• Adjustable faceplate angle; allows mounting
of
faceplate display
to
virtually any dash
This equipment has been tested and found to comply with the limits for a Class B device,
pursuant
to
Part 15
of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference
in
a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and, if not installed and used
in
accordance
with instructions, may cause harmful
interference
with radio
communications. However, there is
no
guarantee that radio interference will not occur
in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user
is
encouraged
to
consult the dealer or an experienced radio/TV technician for help.
You
are cautioned that any changes or modifications not expressly approved
in
this
manual could void your authority
to
operate this equipment.
• Avoid installing the unit where it would be subject
to
high temperatures such as
in
direct sunlight or a hot air stream from the heater or where it would be subject
to
dust,
dirt, or excessive vibration.
• Parking your car
in
direct sunlight will result
in
a temperature rise.
Do
not turn on the
unit if the temperature inside the car
is
very high. Always cool down the unit before
usage.
• If the unit does not turn on, check the connections first. Then, check whether the
fuse
in
your vehicle's fuse box
is
blown and check the fuse at the unit's wiring
harness.
• Carefully read this manual before using the unit. If you encounter any problems that
are not covered
in
this manual, please consult the dealer where you purchased the
unit or the dealer nearest
to
you.
You
may also email
us
at:
support@retrosoundusa.com