Installation guide

Metal Knob Install Guide
Sometimes the Retrosound Shafts need to be adjusted to allow you to
mount our metal knobs to the shafts. Once your radio is installed
follow the steps below to ensure a proper knob fit.
14.
04
I •
For the rear-knob, simply insert
a biade screwdriver diagonaiiy to
slightly spread apart the secondary
back-knob position to allow the
rear knob to fit snugly.
2.
For the front-knob, use a pair
of needle nose pliers and GENTLY
crimp the front-knob prongs closer
together. Please use caution not
to make these too tight, then mount
the front-knob, and you're done!
Final Result!
Modern Sound for your Classic!
3.