Owner's Manual

26
Copyright © 2017 Retro Manufacturing, LLC
26
Copyright © 2018 Retro Manufacturing, LLC
USB DEVICE INSTRUCTIONS
Caution! Except for private use, duplicating audio data (including MP3/WMA) or
distributing, transferring or copying it, whether free or paid for without permission of
the original copyright holder is strictly prohibited by law and international treaty.
Viewing MP3/WMA Song Information
When playing MP3/WMA les from the USB source, you can
view the track name, album name and artist (ID-3) information
automatically from these les. Once the USB drive is inserted, the
following info will scroll across the screen in the following order:
F-DIR (folder directory), MP3 FILE (le name of song), ALBUM (name of
album) ARTIST (name of artist), SONG (name of song).
To access the clock when in USB mode, turn the left-rear knob (#2)
counter-clockwise. The clock will time out after a few seconds and
will revert to the ID-3 information. Turning the left-rear knob (#2)
counter-clockwise again will revert to viewing the ID-3 information
on-screen.
NOTE: FLAC format does not support ID-3 information and will not display the artist or
song information. Not all music software handles ID-3 information the same way. Some
software will produce MP3 les with ID-3 information that is not readable by Motor
4. If this occurs, you may need to use a converter or ID-3 editor to change the ID-3
information for the artist, album and song information to display properly on your radio.