Manualshelf

Owner's Manual

ManualsBrandsRetroSound ManualsAll car stereosAM/FM receiver with aux input for classic cars — does not play CDs (Black buttons)
12345678910
8
Copyright © 2016 Retro Manufacturing, LLC
STEP 1: INSTALL THE LAGUNA FACE
Plug the ribbon cable included with the Motor 1 body into
the Laguna radio face. After plugging in the face, attach it
to the body and tighten with the four radio face mounting
screws provided in the radio face box (the screws are very
small and are in the hardware bag with the shaft nuts).
The RetroSound
®
logo on the Motor 1 body should be facing upwards.
Take care to not install the face to the body upside down.
Figure 1 - Attach the Laguna Face
Radio Face
INSTALLATION INSTRUCTIONS