Owner's Manual

USB DEVICE INSTRUCTIONS

• Motor 2 will read only FAT or FAT32 formatted ash drives.

This radio will NOT read NTFS formatted drives.

• Motor 2 will read les placed in the root directory rst before playing les in the

folder structure of the drive. Please note that les are read in order of creation

NOT alphabetically or numerically. Older les will get read rst in a folder.

Caution! Except for private use, duplicating audio data (including MP3/WMA) or

distributing, transferring or copying it, whether free or paid for without permission of

the original copyright holder is strictly prohibited by law and international treaty.

Viewing MP3/WMA Song Information

When playing MP3/WMA les from the USB source, you can view

the track name, album, artist info (ID-3) information automatically

from these les. Once the USB drive is inserted, the following info

will scroll across the screen in the following order: F-DIR (folder

directory), MP3 FILE (le name of song), ALBUM (name of album)

ARTIST (name of artist), SONG (name of song).

To access the clock when in USB mode, turn the left rear knob

counter-clockwise. The clock will time out after a few seconds and

will revert to the ID-3 information. Turning the left rear knob counter-

clockwise again will revert to viewing the ID-3 information on-screen.

NOTE: FLAC format does not support ID-3 information and will not display the artist or

song information. Not all music software handles ID-3 information the same way. Some

software will produce MP3 les with ID-3 information that is not readable by Motor

4. If this occurs, you may need to use a converter or ID-3 editor to change the ID-3

information for the artist, album and song information to display properly on your radio.