Owner's Manual

OPERATING YOUR RADIO

Display Color (SCAN)

This sub-menu changes the display color. The default setting is SCAN,

which will scan through all of the available colors. To customize your

display color, look for the word SCAN in the sub-menu (if a custom

color has already been chosen, look for that color name in the sub-

menu), then press the right-front knob (#8) to select one of the preset

colors: white, green 1, green 2, green 3, orange, red, pink, purple 1,

purple 2, blue 1, blue 2, user, Scan.

To create a custom color, select USER in the preset color menu, then

rotate the right-front knob (#8) once. The display will say RGB. Now

press the right-front knob (#8) once. This will allow you to edit the RGB

values for 32,000 color variations. Rotate the right-front knob (#8) to

adjust the reds, then press the same knob (#8) to move to the greens.

Repeat this process to adjust the greens and the blues.

NOTE: If you lower all RGB settings down to “00” the display will go black, and you will

need to reset the radio by disconnecting all power from the unit for 2 minutes.

Dimmer High/Low

This sub-menu allows you to adjust the radio’s display brightness

between high (DIMM HIGH) and low (DIMM LOW).

Bluetooth

On/Off (BT)

This sub-menu turns Bluetooth

on or off. Bluetooth

must be enabled

in order to connect a Bluetooth

device for hands-free operation or

streaming audio.