. USER’S MANUAL B62 MAIN BOARD 482B6203
Printed in Taiwan 2000 .
. INDEX This user’s manual describes the jumper setting of B62 Main Board. For detailed technical information, please refer to CDs attached with PC system unit. Table of Contents Technical details 1. Jumpers location diagram for B62 main board 2. Memory configuration 3.
+ 1. Jumpers Location Diagram for "B62 V1.
2.Memory configuration for “B62 V1.X” main board Capacity 16MB 16MB 32MB 32MB 32MB 80MB 80MB 64MB 64MB 128MB 128MB **128MB **256MB DIMM 1 16MB none 16MB 32MB none 16MB 64MB 64MB none 64MB 128MB None 128MB DIMM 2 none 16MB 16MB none 32MB 64MB 16MB none 64MB 64MB None 128MB 128MB IMPORTANT Net PC NC3 and NC4 series support low profile SDRAM DIMM module provided by Flytech (FT-100). NC2 series supports both Flytech low profile SDRAM (FT-100) and standard SDRAM module.
3. Jumper Setting = CPU type selection : Freq. C PU Intel Celeron Intel Celeron Intel Celeron Intel Celeron Intel Celeron Intel Celeron Intel Celeron 300MHz 333MHz 366MHz 400Mhz 433Mhz 466MHz 500Mhz Ratio Externa l Clock 4.5x 66MHz 5.0x 66MHz 5.5x 66MHz 6.0x 66MHz 6.5x 66MHz 7.0x 66MHz 7.
Use FT-8005C AT external power supply (default) Use FT-8006 ATX external power supply Close 2-3 Open 1-2 4
