Installation Manual

Pg. 19
Toyota Tacoma 2016-up
STEP 1: Install seal
STEP 2: Insert mounting cleats
Remove and save the black plastic cap at the
rear of the Deck Rail track system on both
sides of the truck. Loosen and remove tie-
downs or other accessories from each side.
Insert (2) mounting cleats into the track
system on each side.
FOR BOTH
MODELS:
STEP 3: Bolt spacers to RETRAX rails
1. Mount spacer block prior to cover installation to pickup bed.
2. Use the 1/4-28 fastener and 1/4” flat washer on the inside of the
rail. Attach with 7/16” wrench.
5’ model
1/4-28 x 0.75L fastener
1/4 flat washer
Cleat
Passenger side rail
6’ model
White plastic
spacer
1/4-28 x 1.5 L
Cleat
1/4 flat washer
Passenger side rail